QD Style Bushings Type E

QD BUSHINGS TYPE E

Choose your bore size above.

To be used with QD Sprockets or Pulleys 

QD Bushings are precision machined tapered and fully split on one side.

The taper bored QD Sprocket or Pulley easily fits over the tapered bushing, and tightening of the cap screws produces a tight press fit on the shaft.  The sprocket is easily removed from the bushing by using the pull-up bolts as jackscrews in the holes tapped in the rim of the sprocket.  

Dimensions:

Type: E

A: 7/8”
B: 3.834”
D: 6”
E: 1-7/8”
L: 2-3/4”
Bolt Hole Center: 5”
Cap Screws Size: 1/2 x 2-3/4
Qty: 3